Specifications & Downloads



Thesis


Alpha


Specifications

 

Inputs: 2x analogue / 1x S/PDIF RCA / 1x S/PDIF BNC / 1x USB / 1x TOSLINK
Outputs: 2x preamplifier output / 1x tape out
Supported upgrade cards: DAC 2.3 / USB 2.0
Power supply options: internal / Thesis Pi
Max. consumption: 60 W
Dimensions (WxHxD): 22 x 8.5 x 36 cm



Driver


USB driver


Lambda


Specifications

 

Inputs: 5x analogue
Outputs: 1x preamplifier output / 1x tape out
Power supply options: internal / Thesis Pi
Max. consumption: 60 W
Dimensions (WxHxD): 22 x 8.5 x 36 cm


Phi


Specifications

 

Inputs: 1x MM / 1x MC
Outputs: 1x MM 50 Ω / 1x MM 600 Ω / 1x MC 50 Ω / 1x MC 600 Ω
Gain (MC): 44 / 50 / 56 / 62 / 68 / 74 dB
Gain (MM): 33 / 48 dB
Input impedance (MC): 100 / 220 / 470 / 1000 Ω
Input impedance (MM): 47 kΩ / 150 pF
Noise floor: -90 dBV (MC) / -84 dBV (MM)
Power supply options: Thesis Pi
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm


Omega


Specifications

 

Inputs: 1x line input
Outputs: 2x mono speaker / 1x line output
Power (max): 160 W
Load impedance (min): 1.6 Ω
Max. consumption: 350 W
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


Gamma


Specifications

 

Inputs: 1x line input
Outputs: Stereo 4mm speaker
Power (max): 110 W / channel
Load impedance (min): 1.6 Ω
Max. consumption: 350 W
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


Pi


Specifications

 

Type: 2-stage regulated power supply
Supported devices: Thesis Alpha / Thesis Phi / Quasar
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm




Obelisk


Si


Specifications

 

Inputs: 5x analogue / 1x S/PDIF digital
Outputs: 1x stereo speaker / 1x Tape out
Frequency response: 5 Hz – 60 kHz
Input impedance: 10 kΩ
Input sensitivity: 500 mV
Power (8Ω): 50 W / channel
SNR: 96 dB
Supported upgrade cards: MM phono / DAC 1.3 / DAC 2.3
Power supply options: internal / Obelisk X2
Max. consumption: 200 W
Weight: 6 kg
Dimensions (WxHxD): 22 x 8.5 x 36 cm



Manuals


English French


X2


Specifications

 

Type: Unregulated power supply
Supported devices: Obelisk Si
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


PRE


Specifications

 

Inputs: 5x analogue / 1x S/PDIF coaxial / 1x TOSLINK
Outputs: 2x preamplifier output / 1x Tape out
Frequency response (+0, -1 dB): 1 Hz – 105 kHz
Input impedance: 10 kΩ
Input sensitivity (for 775 mV out): 220 mV
Output impedance: < 35 Ω
Max. output level: 7.5 V
Gain: 10 dB
Headroom: 20 dB
SNR > 100 dB
Supported upgrade cards: MM phono / DAC 1.3 / DAC 2.3
Power supply options: internal / Obelisk PX
Max. consumption: 10 W
Weight: 4.5 kg
Dimensions (WxHxD): 22 x 8.5 x 36 cm



Manuals


English French


PX


Specifications

 

Type: Regulated power supply
Supported devices: Obelisk PRE / Canalot / Dactilus / Quasar / Questar
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


PS


Specifications

 

Inputs: 1x line input
Outputs: 1x stereo speaker / 1x line output
Frequency response: 7 Hz – 60 kHz
Input impedance: 22 kΩ
Input sensitivity: 700 mV
Power (8Ω) 50 W / channel
Max. comsuption: 300 W
Weight: 6 kg
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


PM


Specifications

 

Inputs: 1x line input
Outputs: 1x mono speaker / 1x line output
Frequency response: 6 Hz – 60 kHz
Input impedance: 22 kΩ
Input sensitivity: 700 mV
Power (8Ω) 70 W
Power (4Ω) 120 W
Max. comsuption: 300 W
Weight: 6.9 kg
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm


DA


Specifications

 

Inputs: 1x RCA / 1x BNC / 2x TOSLINK / 1x USB
Outputs: 1x direct / 1x buffered out
Output level: 1.2 V (direct) / 2.5 V (buffered)
Frequency response: 3 hz –
SNR: > 97 dB
Supported upgrade cards: DAC 2.1 / 1.2
Supported sampling frequencies: 44.1 / 48 / 88.1 / 96 / 176.4 / 192 kHz (all inputs)
Max. consumption: 15 W
Weight: 4 kg
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm



Manuals


English


Driver


USB driver


DT


Specifications

 

Supported disc types: CD-DA / CD-R / CD-RW (8 / 12 cm)
Supported audio formats: CD digital audio / HDCD / MP3
Outputs: 1x S/PDIF RCA / 1x TOSLINK optical
Output format: 44.1 kHz / 16 bit stereo
Max. consumption: 15 W
Weight: 3.9 kg
Dimensions (WxHxD): 22 x 8.5 x 32.5 cm



Manuals


English French





Elixir


Elixir


Specifications

 

Inputs: 4x line analogue / 1x MM phono
Outputs: 1x stereo speaker / 1x preamplifier out / 1x 6.35mm headphones out
Freq. response (spekers): 10 Hz – 110 kHz
Freq. response (preamp): 3.5 Hz – 300 kHz
Freq. response (headphones): 3.5 Hz – 320 kHz
Input impedance (line): 10 kΩ
Input impedance (MM): 47 kΩ / 100 pF
Input sensitivity: 135 mV
Power (8Ω): 50 W / channel (55 W peak / ch)
Power (4Ω): 65 W / channel (90 W peak / ch)
Max. consumption: 150 W
Idle consumption: 20 W
Weight: 6 kg
Dimensions (WxHxD): 22 x 8.5 x 36 cm



Manuals


English


Abacus


Specifications

 

Inputs: 1x RCA / 1x BNC / 2x Optical / 1x USB / 1x expansion card
Outputs: 1x line level analogue
Output level: 2.1 Vrms
Freq. response: 3 Hz – (depends on sampling frequency)
DSD filter freq.: 50 kHz standard Scarlet Book
Sampling frequencies (BNC, RCA, opt.): 32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz max. 24 bit PCM
Sampling frequencies (USB): 32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 / 352.8 / 384 kHz max. 32 bit and 2.8224 / 5.6448 MHz 1 bit native DSD
Max. consumption: 50 VA
Weight: 4.5 kg
Dimensions (WxHxD): 22 x 8.7 x 32.5 cm



Manuals


English

Drivers


USB driver



Modular


Canalot


Specifications

 

Inputs: 1x analogue / 1x S/PDIF RCA / 1x USB
Outputs: 2x 6.35mm headphone / 1x line out
Frequency response (+0, -1 dB): 6 Hz – 260 kHz
Input impedance: 10 kΩ
Gain: 20 dB
Input sensitivity: 320 mV
Power: 200 mW (32 Ω) / 100 mW (120 Ω) / 20 mW (600 Ω)
SNR: > 100 dB
Upgrade card options: 1 DAC 1.3 / 1 USB 2.0
Supported sampling frequencies: 44.1 / 48 / 88.1 / 96 / 176.4 / 192 kHz
Power supply options: X-PSU 40 (standard) / Q-PSU / Obelisk PX
Max. consumption: 17 W
Weight: 1.2 kg
Dimensions (W x H x D): 9.5 x 7.5 x 25 cm



Driver


USB driver


Canamp


Specifications

 

Inputs: 1x analogue
Outputs: 1x 6.35mm headphone / 1x line out
Frequency response (+0, -1 dB): 10 Hz – 50 kHz
Input impedance: 10 kΩ
Power: 300 mW (100 Ω)
SNR: > 85 dB
Max. consumption: 15 W
Weight: 1.2 kg
Dimensions (W x H x D): 9.5 x 7.5 x 25 cm



Dactilus


Specifications

 

Inputs: 1x S/PDIF RCA / 1x TOSLINK / 1x USB
Outputs: 1x line out
Frequency response: 3 Hz –
Output level: 2.5 V
SNR: > 97 dB
Upgrade card options: 1 DAC 1.3 / 1 USB 2.0
Supported sampling frequencies: 44.1 / 48 / 88.1 / 96 / 176.4 / 192 kHz (all inputs)
Power supply options: X-PSU 30 (standard) / Q-PSU / Obelisk PX / Thesis Pi
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm



Driver


USB driver


Quasar


Specifications

 

Inputs: 1x MM / 1x MC
Outputs: 1x 0dBm (High Out)/ 1x -10 dBm (Low Out)
Frequency response: 3 Hz – 150kHz
Input sensitivity (MC): 100 / 330 / 600 µV
Input impedance (MC): 100 / 470 / 1000 Ω
Input sensitivity (MM): 2.5 mV
Input impedance (MM): 47 kΩ
Gain: 50 dB (MM) / 62 – 78 dB (MC)
RIAA accuracy: +/- 0.5 dB (20 Hz – 20 kHz)
Power supply options: Q-PSU (standard) / Obelisk PX / Thesis Pi
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm


Questar


Specifications

 

Input: 1x stereo RCA
Output: 1x stereo RCA
Frequency response: 20 Hz – 20kHz
Input sensitivity: 3 mV (MM) / 220 µV (MC)
Input impedance: 47 kΩ (MM) / 100 Ω (MC)
Gain: 42 dB (MM) / 64 dB (MC)
Power supply options: X-PSU 30 (standard) / Q-PSU / Obelisk PX
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm


Q-PSU


Specifications

 

Type: Regulated power supply
Supported devices: Canalot / Dactilus / Quasar / Questar
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm


Orbit


Specifications

 

Type: Turntable power supply
Output voltage: 220 V (Orbit 2) / 110 V (Orbit 1)
Output frequency: 50 Hz (for 33.1/3 rpm) / 67.5 Hz (for 45 rpm)
Output stability: 0.1 % frequency shift / max. 1 % THD
Output power: Max. 3 W
Dimensions (W x H x D): 9.5 x 7.5 x 22 cm


By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close